 |
 |
TruMatic 7000 |
|
|  |
| Application |
Combination processing: Punching and laser cutting |
| Category |
High-end machine with combination technology |
| Working range (X x Y) |
Medium format: 2540 mm x 1280 mm
Large format: 2540 mm x 1570 mm |
| Laser |
TruFlow 4000 |
| Tools |
- 22 with 3 clamps
- 21 with 4 clamps |
| Sheet thickness |
max. 8 mm |
|
| | As a high-end system from TRUMPF, it offers speed that has never been seen before in combination processing. Such speed is possible because – among other things – the machine has been built with flying optics for the first time. With additional axes in the X and Y direction, the laser cutting head can travel a good distance and can be positioned quickly. A high processing speed develops as a result of the interaction of the main axes. This high speed is particularly noticeable when detailed parts with complex contours are processed. In addition, a newly constructed laser flap considerably shortens part removal time. |
|
 |
|
Laser cutting head |
|
| | One cutting head for everything
Due to the newly designed beam guidance, the TruMatic 7000
can process sheet metal in a variety of thicknesses using the
same cutting head. Head changing is no longer necessary. The
automatic nozzle changer also takes care of exchanging the
nozzle for you. Nonproductive auxiliary processing times can be
reduced, and every material with varying type and thickness
can be cut in any sequence – and all of this is done comfortably
without the need for operator intervention. |
|
|
 |
|
Punching head with active die |
|
| | Avoid scratches
The TruMatic 7000 can be equipped with the active die which works from the bottom like a second punching head.
The active die enables scratch-free punching and forming at an unrivaled speed. When you position the sheet metal, the die moves down so that it cannot touch the sheet. This is true for punching as well as for higher forming dies.
With the active die you expand the forming options of your TruMatic 7000. Higher upward forming can be actively performed in the sheet. In addition, the active die has room for larger tools and makes it possible to form closer to the clamps, because the sheet is always evenly supported. This results in higher material utilization and a reduced scrap. |
|
|
| | Automation
The SheetMaster together with the additional laser axes allows you to simultaneously cut and remove up to four parts safely.It is equipped with four movable suction bars, each one consisting of up to 80 monitored suction cups. Thus, it is possible to remove even the smallest, detailed parts.
Of course you can automatize the TruMatic 7000 with further components.
 More |
| | |
|
| | |
Specifications
| |
TruMatic 7000 |
| Working range (X x Y) |
Medium format |
Large format |
| Combined punching/laser |
2540 mm x 1280 mm |
2540 mm x 1570 mm |
| Punching operation |
2540 mm x 1370 mm |
3120 mm x 1660 mm |
| Laser operation |
2540 mm x 1280 mm |
3120 mm x 1570 mm |
| Max. sheet thickness |
8 mm (mild steel)
8 mm (stainless steel)
4 mm (aluminium) |
8 mm (mild steel)
8 mm (stainless steel)
4 mm (aluminium) |
| Max. punching force |
220 kN |
220 kN |
Max. stroke rate, punching
(E = 1 mm) |
1200 1/min |
1000 1/min |
| Max. stroke rate, marking |
approx. 2800 1/min |
approx. 2800 1/min |
Tools, linear magazine
With multiTools max.
|
22 with 3 clamps
220 tools |
21 with 4 clamps
210 tools |
| Max. axis speed |
116 m/min (simultaneous X and Y) |
| Max. accelerations |
C-axis: 330 1/min |
| Tool exchange time |
Standard punching tool: 2,8 s
Mulitool: 0,3 s |
| TRUMPF CO2-Laser |
TruFlow 4000 |
| Space requirements |
approx. 7950 mm x 6700 mm |
approx. 8070 mm x 7650 mm |
|
|
){kind=small}
){kind=small}
){kind=small}
Home