 |
 |
TruLaser 7040 NEW |
|
|  |
| Application |
Laser cutting at high speed |
| Category |
Laser Cutting Machine |
Working
range |
2500 mm x 4000 mm
|
| Laser |
TruDisk 6001 |
| Sheet thickness |
25 mm (mild steel)
20 mm (stainless steel)
20 mm (aluminium) |
| Automation |
Possible for everything from simple loading equipment to complex storage connection |
|
| | The TruLaser 7040 NEW is the most productive laser machine in the world thanks to its two cutting heads that process two parts simultaneously. It is ideal for producing large batch sizes. All machine drives are frictionless linear drives. We have increased the acceleration of the X and the Y axis by an additional 25 percent over the previous model. With unrivalled speed, the Z axis adapts to any variations in the sheet and its reliable processes enable high feed rates. |
|
| | Stable and light
Our engineers constructed the machine’s cross member out of light, but stable carbon fibers that are also successfully used in the racing industry. Only with this material is the combination of impressive dynamics and unrivalled precision possible. In addition, the machine body has a very stiff construction – an absolute must for perfect contours. |
|
|
 |
|
The two laser heads of the TruLaser 7040 NEW |
|
| | With the TruLaser 7040 NEW, two laser heads cut simultaneously.
A 6,000 watt strong TruDisk disk laser supplies the necessary power. Each head works with 3,000 watts. However, you can focus the laser output on one cutting head and then to cut sheet metal up to 25 mm thick. The beam is guided by a fiber optic cable from the resonator to the cutting head. This is uncomplicated and completely maintenance free.
Energy efficient production
The way in which energy from the TruDisk 6001 is applied to the material is simply ideal for cutting thin sheet metal – and at extraordinarily high cutting speeds. That is why it is the perfect match for the machine concept of the TruLaser 7040 NEW. The TruDisk 6001 is also extremely energy efficient. When it is not cutting, it operates in standby mode which requires almost no power because no gas has to be circulated. |
| | |
|
| | |
Technical Data
| |
TruLaser 7040 NEW |
| Working range |
X axis: 2500 mm
Y axis: 4000 mm
|
| Z axis: 100 mm 1 |
| Max. sheet thickness |
25 mm (mild steel)
20 mm (stainless steel)
20 mm (aluminium) |
| Max. axis speeds |
approx. 304 m/min (simultaneous) |
| TRUMPF disk laser |
TruDisk 6001 |
| Space requirements |
approx. 16800 mm x 8100 mm |
|
|
| | |
1 The working range in the Z direction is reduced by 25 mm on machines with automation. |
|
){kind=small}
){kind=small}
Download Brochure TruLaser 7040 NEW (PDF, 604 KB)
Home